For Condensed Formula What You Do To The Triple Bond 10 Phases of Swimming Pool Construction

You are searching about For Condensed Formula What You Do To The Triple Bond, today we will share with you article about For Condensed Formula What You Do To The Triple Bond was compiled and edited by our team from many sources on the internet. Hope this article on the topic For Condensed Formula What You Do To The Triple Bond is useful to you.

10 Phases of Swimming Pool Construction

Building an inground swimming pool is the culmination of 10 different stages of swimming pool construction. This article will give you a brief understanding of the manufacturing cycle. And it all starts with the desire to have a pool in your own backyard.

Design and Engineering

The first place most homeowners look for qualified swimming pool contractors is the local phone book, and word of mouth from others who have built pools. After the initial interview process, you will have a good idea of ​​how much it will cost to build your swimming pool. The contractor or consultant will provide a design and complete bid for your approval. With the contract in hand, the contractor will obtain all necessary engineering from a qualified structural engineer. The contractor will then submit for a permit from the local jurisdiction. At this point, it may be necessary for the contractor to apply for a Home Owners Association (HOA) approval based on your local community requirements. Once construction permits are obtained, construction kicks into high gear.

Layout and Excavation

This is one of the most exciting stages of swimming pool construction, excavation. Excavation is the excavation and formation of a swimming pool. The first thing excavation crews do is pregrade. Pregrade is the clearing of the pool site and grading of the area for the swimming pool. This allows the crew to paint the final shape of your pool on the floor and at the same time the crew will stake the perimeter of the pool and add forms for the structure of the pool. The general time required to dig a pond depends on various factors. These factors include: accessibility, soil conditions, and the overall size and depth of the pool. Nowadays most ponds are dug in 1 to 2 days.

Rough plumbing and electrical

Once the pool is dug, it’s time to move on to rough plumbing and electricity. This is the place to dig all the holes for all the pipes and conduits needed to operate your pool. Sometimes, rough plumbing and electrical will be split into two parts, otherwise all trenches and pipe and drain installation will be done at the same time. These include suction and return lines, water-feature lines, vacuum cleaner lines, fill lines, solar inlets and returns, gas lines for swimming pool heaters and future barbecues and firepits, and electrical service lines. In most cases this will take 2-3 days to complete, and can be done before, during or after the steel.

Steel

The steel step is the addition of rebar built into the final shape of the pool. A rebar contractor will “tie” the steel using baling wire into a grid pattern determined by a structural engineer. A good team usually takes less than a day to tie steel depending on the size, shape and base of any raised wall or bond beam.

Gunite or shotcrete

By this time, your backyard will look like one big disaster zone, with ditches here and there and a criss-cross pattern of rebar with a big hole in your yard. Gunite or shotcrete is the concrete used on the surface of the pool, forming the shell of your pool. Crews will arrive and finally apply concrete through the hose, as the pool nears completion. Benches have been installed, and pool walls and floors will be completed. This is also the first time that you will need to be actively involved in the construction of your pool. For the next 7 to 10 days, you will need to hose down the swimming pool shell two to three times a day to help cure the gunite or shotcrete. You will be really surprised how much water the pool structure absorbs.

Tile and Rock

After the installation of gunite or shotcrete, the waterline tile and any rocks or stones will be installed in your pool. Tile is essential to provide an easy-to-keep-clean surface at the waterline. Rocks or boulders are added to create a natural “swimming hole” look and feel and include waterfalls and jump rocks. For pools with a contemporary look or classic style, tile is incorporated into the design and applied not only to the waterline, but also to any raised walls or water-features.

decking

(Concrete, Pavers, Tracks, Tile, Stone, etc.) With the tile installed, the next addition to your swimming pool project is decking. Now where I grew up, decking was always associated with wood, and redwood was king. But when I got involved in the swimming pool industry, the deck was the item that surrounded the pool. For the majority of swimming pool owners, the deck of choice is concrete. Concrete is durable and inexpensive compared to other options, such as grass or landscaping, tile, stone, pavers, and natural or synthetic wood products. Installation of decking takes at least two days to fabricate and finish, or may take several days and weeks depending on the surface. The deck crew will also be responsible for setting up the equipment pad, where all the pumps, filters, heaters and other equipment needed to operate your pool will be located.

Tool set

Excitement builds, you’re almost done and ready to swim. At the equipment set, either your pool service company or the plumbing and electrical company will return to install all the equipment. Lights will be installed, control panels will be hooked-up, all pumps, heaters and filters will be mounted on the equipment pad and plumbed. This is usually completed within one to two days. Everything is ready to fill your pool with water. But wait, we’re missing the all important pool surface.

Plaster

Plaster provides a waterproofing surface for your pool. Plaster comes in many different forms on plain-aged, stone and polished surfaces. Usually, it can be done in one day. And for those of you where money is no object, it can be a full tile pool surface with Grecian borders. After applying the swimming pool finish, it’s time to start filling your pool.

Construction clean-up and start-up

Once the bulk of construction is complete, all excess and leftover materials will be removed from the pool site. All the empty boxes will be taken to the dumps, and finally, your backyard will be ready to enjoy and not look like a disaster zone. The last thing left to do is start the pool. The start up process ensures that all equipment is operational and that the swimming pool has all the necessary chemicals to prevent algae and other problems. Now it’s your turn to start reaping all the benefits of swimming pool ownership.

This is a short article describing the inground swimming pool process for gunite or shotcrete pools. A swimming pool is the culmination of many individuals, each a seasoned veteran of his or her trade. For many homeowners, a licensed contractor can guide them through the process. For others, the option of building their own pool and working as their own general contractor can save them thousands of dollars but requires a deeper level of understanding.

Video about For Condensed Formula What You Do To The Triple Bond

You can see more content about For Condensed Formula What You Do To The Triple Bond on our youtube channel: Click Here

Question about For Condensed Formula What You Do To The Triple Bond

If you have any questions about For Condensed Formula What You Do To The Triple Bond, please let us know, all your questions or suggestions will help us improve in the following articles!

The article For Condensed Formula What You Do To The Triple Bond was compiled by me and my team from many sources. If you find the article For Condensed Formula What You Do To The Triple Bond helpful to you, please support the team Like or Share!

Rate Articles For Condensed Formula What You Do To The Triple Bond

Rate: 4-5 stars
Ratings: 1148
Views: 29146925

Search keywords For Condensed Formula What You Do To The Triple Bond

For Condensed Formula What You Do To The Triple Bond
way For Condensed Formula What You Do To The Triple Bond
tutorial For Condensed Formula What You Do To The Triple Bond
For Condensed Formula What You Do To The Triple Bond free
#Phases #Swimming #Pool #Construction

Source: https://ezinearticles.com/?10-Phases-of-Swimming-Pool-Construction&id=715571